Step 1: Connect the USB Phone to PC
Step 2: Install the Latest SkypeTM
Step 3: Install the USB Phone Driver:
Skype@phone
Unpacking
|
When
you receive your USB phone SX-06L, please check to make sure that your package
contains the following items:
|
|
One USB handset |
|
|
One installation CD |
|
|
One mini USB cable |
|
|
One user manual* |
|
|
One earphone |
Your Phone
|
²
Earpiece
Phone Layout
Earpiece
|
LCD: */Tab: Input
“*” during a call; switch between Skype Contacts & Call List in standby
mode Down: Earphone Connector Power LED Up: End
Key: End/Cancel calls; return to the standby mode Status LED* Dial/Answer: Receive calls;
call the selected contacts. Mute: Set the phone
mute on/off during a call. Clear:
Clear a number in the screen. #/+:
Input “+” in standby mode; input “#” during a call Numbers: Input digit numbers
Display Contact List, Call List and Time.
Microphone
Scroll down Skype Contacts/ Call List; decrease volume for earpiece 
Scroll up Skype Contacts/Call List; increase volume for earpiece.
|
Your Phone |
²
Overview
SX-06L is a high quality
USB hand phone with LCD and 4-polyphonic ring tones. The fully functional
keypad and the LCD screen enable you to make/receive Skype
calls without using mouse and keyboard. Just plug it into your PC or laptop,
and then you can enjoy the full features of SkypeTM.
Features:
ü Monochrome 128*64 pixel LCD. Supports all kinds of
languages.
ü Skype Contact List, Call List and time display on LCD
screen
ü 12 classical 4-polyphonic ring tones catering to
different tastes.
ü Rings loudly on an incoming call.
ü Fully functional keypad and LCD screen enables you
to make/receive calls without using keyboard and mouse.
ü Power LED and Status LED.
ü Mic. mute button to protect your privacy.
ü Supplied earphone for hands-free operation.
ü Acoustically isolated earpiece and microphone to
eliminate echo.
ü Full-duplex communication with crystal clear sound.
ü USB interface PnP. No external power/sound card
needed.
ü Support Skype & QQ.
² Host System Requirements
ü Microsoft Windows 2000/XP.
ü
Pentium
400MHz above processor/128MB RAM/16MB free hard disk capacity.
ü
One
USB port available.
ü
Internet
connection (ADSL, Cable Modem, Dial-Up, Wireless LAN).
² Specifications
|
Weight |
85g |
|
|
Dimensions |
48mm*120mm*24mm |
|
|
|
Mini USB A-type |
|
|
LCD |
Size |
29mm*13.5mm |
|
Pixel |
128*64 |
|
|
Earphone Connector |
2.5mm |
|
|
Voltage |
4~5.25 V |
|
|
Operating Humidity |
5~95%RH |
|
|
Operating Temperature |
0~40℃ |
|
Getting Started
|
Step 1: Connect the USB Phone to PC
The hardware
installation is very simple. All you need to do is to connect the USB phone to
the USB port on your PC with the mini USB cable. The red Status Power LED on
the phone will be on.
Step 2: Install the Latest SkypeTM
The USB phone must work
with SkypeTM Rev. 1.3.0.66 or later. If your SkypeTM is
outdated, please download the latest version of SkypeTM software
from its official website www.skype.com.
However, how to use
SkypeTM is not included in this manual. For more detailed
information about SkypeTM, please visit its official website www.skype.com.
Step 3: Install the USB Phone Driver: Skype@phone
You can insert the supplied
installation CD into your PC or download the latest version of driver “Skype@phone” from www.echostore.com
.
After the installation, please restart Windows.
|
Getting Started |
If Skype@phone is
run for the first time, Skype™ will pop up the following window. Please select “Allow
this program to use Skype” as the illustration shown below:
Now you are ready to
make/receive calls with the USB phone.
USB Phone Test
|
|
|
To test your USB phone, please click the icon |
|
|
After adding Echo123 to your Skype Contacts, start
chat with him by clicking the icon |
|
|
Input “callme” and press “Enter” on your keyboard. |
.
|
USB
Phone Test |
|
|
Wait for a moment and echo123 will
call you soon. If the USB Phone has been
correctly connected to the PC, you will hear the melody ring tone. You can
receive this call by pressing |
Update the USB
Phone Driver
|
Please remember to update the USB
phone driver regularly. You can follow this guideline here:
|
|
Right click the icon |
General Functions
|
²
Make a Skype call
Use 
/
(“Up/Down”) on your phone to scroll up/down and select the contact that you
wants to call, and then press 
(“Dial/Answer”).
² Make a SkypeOut call
Directly press 
(“#/+”) + “country code” + “city code” + “phone
number”.
Examples:
(Here we use the country code "1" for calling
If you dial a wrong
number, please press 
C (“Clear”) to clear it.
If you input a wrong number, please press 
to clear it.
² Receive a Skype call
Press 
(“Dial/Answer”)
to receive calls.
² End a call
Press 
(“End Calls”) to end a call.
²
Set the USB phone Mute
Press
(“Mute”) to set the phone mute during a
call. (When the phone has
been set mute, the green Status LED will flash slowly.)
|
General Functions |
² Select your favorite melody
|
|
To select your favorite melody, please
right click the tray icon |
|
|
Then, you will see this window in which
you can select or test melodies, as well as adjust the volume of melody. |
²
Adjust the Volume
|
|
Press |
|
General Functions |
|
/² Set LCD Display
|
|
To set your LCD display on standby mode,
please right click the tray icon |
|
|
Trouble Shooting
|
For latest information
about the Trouble Shooting and the FAQ, please visit
Q1: Why did I see the icon 
rather than 
in the taskbar? What’s wrong with the
driver software?
If you see the icon ,
1) please check whether SkypeTM is running at the moment. If not so,
please run SkypeTM;
2) please check whether you can see the icon 
in the SkypeTM Windows if
SkypeTM is running.
But if you cannot see this
icon, please follow the steps:
|
|
Step1: “Tools” —“Options”. |
|
Trouble Shooting |
|
|
Step 2: “Privacy”--“Related Task: Manage other
program’s access to Skype”. |
|
|
Step 3: Choose “Change” |
|
|
Step 4: Choose “allow
this program to use Skype”
|
|
Trouble Shooting |
Q2:
After turning on the computer, I see the icon 
.
Why?
There are two possible causes if you see
the icon 
:
1)
The USB phone fails to
communicate with your PC. Please check whether the USB port is in a normal
state.
2)
The USB phone fails to work
normally in Windows. You may need to reinstall the device driver. Please follow
the steps below:
“Start”—“Setting”—“Control
Panel”—“System”—“Hardware”—“Device Manager”
Then,
you will see the following window. Please check whether these three devices
below are in a normal state.
“USB
Human Interface Device”,
“USB Audio Device”
“USB Composite Device”
|
Trouble Shooting |
If there is a question mark or an
exclamation mark with one of these devices, please follow the guideline
below. 
|
Trouble Shooting |
|
|
