Content

Unpacking ………………………………………………………………2

Your Phone ……………………………………………………………3
The Phone layout ………………………………………………………………4

Specification ………………………………………………………………………4

Key Features ……………………………………………………………………5

Host System Requirements ……………………………………………………5

Getting Started ………………………………………………………6
Install the Skype^TM…………………………………………………………………6
Install the Skype@phone…………………………………………………………8
Plug the USB Hand Phone into your PC ………………………………………11
General Functions………………………………………………………12

Make an Internet call ……………………………………………………………12
Make a SkypeOut call ……………………………………………………………13

Receive a phone call………………………………………………………………13

Choose your favorite melody ……………………………………………………13

Trouble Shooting ………………………………………………………14

Unpacking

When you receive your PhoneSkype SX-06, please check to make sure that your package contains the following items:

	One USB handset
	One installation CD
	One mini USB cable
	One user manual

In addition, the earphone is not included in your package. But you can obtain it form the local USB Hand Phone Dealer.

Your Phone

² Phone Layout

² Specification:

Weight	155g
Dimension	48*120*24mm
USB Port	Mini USB A-type
Earphone Connector	2.5mm
Voltage	4~5.25 V
Operating Humidity	5~95%
Operating Temperature	0~40 degree

Your Phone

² Key Features
The PhoneSkype SX-06 is a high quality USB hand phone with 4-polyphonic ring tones. Its fashionable appearance, easy-to-use design and euphonious melody will set you apart from others. Just plug it into your PC or laptop, and then you can enjoy the full features of Skype^TM.

ü 12 classical 4-polyphonic ring tones catering to different tastes.

ü Rings loudly on an incoming call.

ü Fully functional keypad enables you to make/receive calls even easier.

ü Power LED and Connection LED

ü Acoustically isolated earpiece and microphone to eliminate echo.

ü Full-duplex communication with crystal clear sound.

ü USB interface PnP. No external power/sound card needed.

ü Handy, chic, and portable for notebook PC.

ü Also compatible with other PC-based softphone applications, such as MSN, Yahoo Message, QQ, Xten, Dialpad, MediaRing, Net2phone, etc.

² Host System Requirements

ü Microsoft Windows 2000/XP

ü Pentium 400MHz above processor/128MB RAM/16MB free hard disk capacity.

ü One USB port available

ü Internet connection (ADSL, Cable Modem, Dial-Up, Wireless LAN)

Getting Started

² Install the latest Skype^TM

The USB phone must work with Skype^TM Rev. 1.3.0.55 or later. If your Skype^TM is outdated, please download the latest version of Skype^TM software at

http://www.skype.com/products/skype/windows/ and install it.

However, how to use Skype^TM is not included in this manual. For more detailed information about Skype^TM, please visit its official website www.skype.com

Getting Started

² Install Skype@phone

You can insert the CD-ROM into your PC or download the latest version of Skype@phone at http://www.echostore.com/skype-handset-mobile.html.

Step 1:

Run the Skype@phone.exe, and you will see the following window:

Getting Started

Step 2:

Step 3:

Getting Started

Step 4:

If the Skype@phone runs for the first time, SkypeTM will pop up the below window:

After that, you will see the icon in the taskbar, and the installation of Skype@phone is finished.

Getting Started

² Plug the USB Phone into your PC

The hardware installation is very simple. All you need to do is to connect the phone’s cable to the USB port on your PC. The red status LED on the phone will be on.

Then, the iconwill change to be in the taskbar, which means that everything is ready for you to make/receive Internet calls.

If you are connecting the phone for the first time, Windows will detect a new device and install drivers. There is no need for any special drivers, as the phone supports the Windows Human Interface Device and USB Audio Device 1.0 standards.

Notice:

If you see the icon, which means the USB Phone has been connected incorrectly, please re-connect USB Phone to PC.

General Functions

² Make an Internet call (from PC to PC)

Step 1:

Press or repress “Dial/Answer” on phone to pop up the Skype^TM or QQ window. Next, press “*/Tab” to switch to the “Contacts List”.

Step 2:

Press “Up/Down” key on your phone to scroll up/down to select the contact that you want to call.

Step 3:

Press “Dial/Answer” to make a call thru Skype^TM.

General Functions

² Make a SkypeOut call (from PC to Phone)

Directly press “#/+” + “country number” + “city number” + “phone number”

² Receive a Skype call

Press “Dial/Answer” to receive calls as if using your mobile phone.

² Select your favorite melody

To select your favorite melody, please right click the icon on the taskbar and choose “Options” as the following picture.

Then, you will see the following windows in which you can select or test melodies, as well as adjust the volume of melody for your Skype^TM and QQ.

Trouble Shooting

For latest information about the Trouble Shooting and the FAQ, please visit

http://help.echostore.com/Skypephones/ThePhoneskypeSK.pdf

Question 1

When I play a MP3 or audio CD, the music comes from the USB phone. How to have the music played back from the PC’s sound card?

After installing the USB phone, the default audio device in the system will change to "USB Audio Device". So, if the USB phone is connected, you can hear sound playing from the USB phone whenever you play mp3 or audio CD. To play the music from your speaker, you should set your PC’s sound card as the preferred audio device. Please follow the steps below:

“Start” → “Settings” → “Control Panel” → “Sound and Multimedia” → “Audio”

When the corresponding window appears, please check if the preferred devices for “Playback” and “Recording” are your PC’s sound card.

Question 2

Can I use the phone work with other PC-based softphone applications, such as MSN, Yahoo Message, Xten, Dialpad, MediaRing, Net2phone?

Yes, of course. The USB phone is a standard audio device in Windows so you can set the USB phone as audio input/output, and the software Skype@phone can receive the input from the USB phone and can redirect it to the application when Skype™ is not running. However, incoming phone ring are not supported when used with all other softphone applications.

Question 3

Why sometimes I can hear an echo of my own with half a second delay?

In the USB phone, speaker and microphone are acoustically isolated to eliminate echo so there is no echo in the other side. It doesn’t work no matter how you would deal with echo if the other side uses desktop speakers and a separate microphone, because your speech played from his speaker would come back thru his microphone. If both sides use high-quality USB phone, there is no echo at all.